-
### The problem
After restarting Home Assistant with the camera integration enabled, it automatically and continuously requests an MJPEG stream from the camera, leading to unnecessary network traffic…
-
Use `DeepFace.stream()` and change the source to the ESP32-CAM IP address (will be sent through a POST request to the Spring server once connected). The address will be sent once, unless the server se…
-
### Issue
Hi!
Is it possible to run the project on an ESP32S2 /S3 ? We want to design a custom hardware for it, and we need a few extra GPIOs. We are thinking about S2 but I couldn't find any info…
ssk73 updated
1 month ago
-
The Raspberry Pi Pico has a considerable processing power, as compared to Arduino and other microcrontrolers.
Some advantages would be having no linux, small power draw to run from batteries, small…
irae updated
3 months ago
-
**Carefully written Issues are more likely to be given priority.**
**丁寧に記述された報告は優先して対応される可能性が高くなります。**
## Environment ( 実行環境 )
- MCU or Board name: [ESP32-S3 N16R8]
- Panel Driver IC: [GC9…
-
# Problem/Motivation
After updating none of my 3 cams could connect. The logs showed the connection to the ips being closed. I tried power cycling the cams and restarting the add on. I could still se…
-
Hi,
So I have been a bit annoyed by how complex this library is to use in PlatformIO and ESP-IDF, as mentioned [here](https://esp32.com/viewtopic.php?t=27293) it is quite the chore to get it build…
-
would be nice if there is a
inbrowser flash improv wifi config
version
https://ldijkman.github.io/async-esp-fs-webserver/
installed the program
works
but i see no mDNS adres hostname is not…
-
rst:0x7 (TG0WDT_SYS_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0030,le…
-
### The Problem
Hallo zusammen,
ich habe zwei ESP32 Cam Module mit AI on the Edge Release: v15.7.0 installiert, um meinen Gaszähler als auch den Wasserzähler auszulesen.
Das ESP32 Cam Module mi…