-
Have you considered adding the ability to turn off the fan as well after the heaters are shut off? My fans are always blazing away and seemed like a logical choice to build it into this plugin.
-
Hello,
could it be that there was an error in the following description/translation?
"Appliance priority:
Appliances with a higher number are prioritized compared to appliances with a lower numb…
-
I have a Octopus V1.1 which let out smoke and now heaters are shorted on.
is there a circuit schematic or part number for this component to replace?
![IMG_2948](https://user-images.githubuserconte…
-
After installing 2023.1, I get these errors in the logs about the temperature unit. I assume 'C' needs changing to '°C' ?
```
Entity sensor.immersion_heater_set_point () is using native unit of me…
-
When running at 1 minute timesteps, the thermostat control with deadband can exceed the deadband limits. It's mainly an issue for the water heater, which can increase in temperature pretty quickly. It…
-
ATM thermostat's architecture consists in relays attached to RaspberryPi and temperature sensor attached to ESP8266. The Raspberry requests temperatures to ESP8266 through wifi UDP packets and upon re…
-
on the one hand o2heaterPin calibration field seems to be about narrow band control
```
field = "Heater output", o2heaterPin, { o2heaterPin != 0 || enableAemXSeries == 0 }
```
on the othe…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### I'm having the following issue:
1. When I run the "Plum ecoMAX: get_schedule" service for heating, the integra…
-
**Is your feature request related to a problem? Please describe.**
There are several solutions on how to save a print that failed midway. One is to reslice the object that is submerged into the bed b…
-
I am running BPL 4 "new ui" on a ESP8266 chip (D1 mini), it boots fine and takes commands but after 10-15 min of controlling the fridge/heater it looses connection to the temp sensors and goes in to i…