-
is the new mini compatible with tasmota?
I ordered it 4 weeks ago and it was shipped 2 weeks ago
should be here every day and i need a pulse function
so anyone already tested it and provide a inf…
-
## What happened
Incorrect image of SONOFF S31 Lite is displayed Zigbee2mqtt web ui and https://www.zigbee2mqtt.io/devices/S31ZB.html
https://raw.githubusercontent.com/Koenkk/zigbee2mqtt.io/…
-
Hi folks,
I'm using Home Assistant with ZHA and a flashed Sonof with Tasmota firmware (9.2.0.2 zbbridge).
All devices work but often my switches don't work with the first try, especially with automa…
-
**Device description**
Itead Sonoff Wireless Switch SNZB-01. Features single, double press and long press. Battery powered.
--
**MQTT message with device information**
```
2020-08-20 10:14:37: …
-
Hi!
Sonoff mini in DIY mode with firmware 3.5 and 3.6 do not detected by Home Assistant.
Is there any hope that these devices will be included in the list of tested devices?
Thank You!
-
Hello, this is more of a device-related question, I'm asking because I didn't get a satisfactory response from the Itead support forums. Please delete if or close if not allowed.
I have a Sonoff S…
-
*Before creating a new issue please check that you have:*
* *searched the existing [issues](https://github.com/xoseperez/espurna/issues) (both open and closed)*
* *searched the [wiki](https://gith…
-
Hi,
is is possible somehow to control Sonoff T1 UK: 3 Gang WiFi & RF 86 Type Smart Wall Touch Light Switch ?
https://www.itead.cc/sonoff-t1.html
I can see that accessory on Homekit but cannot be …
-
I recently started to deploy some espurna nodes (some sonoff and some nodemcus) around my house. 2 days ago I noticed one of them is restarting 2 or 3 times per day, without any pattern.
I updated …
-
After flashing itead-sonoff-th I found out that i have to enable RPN rules. In order to activate this option I sed #define RPN_RULES_SUPPORT to 1.
After flashing with this new setting, the webs…
ghost updated
4 years ago