-
硬改32mk2p版，1月16日最新版全新glong编译，无法软起动。软起直接亮红灯，断电后可以启动。
使用AmadeusGhost@7658518 版可以软重启，各项功能正常。
最新版没有32m选项，我看源码好像是自动识别，所以选择k2p进行编译。
-
According to the JEDEC standard, DQS port should be inout:
However, the generated Ver…
-
From [Wikipedia](https://en.wikipedia.org/wiki/Units_of_information):
Note that:
* Bytes are capital B
* In SI, kilobyte is kB (lowercase k)
So it should be along the lines of:
* SI: `[…
-
我按照readme里面的方法尝试了一下 ，依然显示有问题
\ | /
- RT - Thread Operating System
/ | \ 4.0.1 build Mar 12 2020
2006 - 2019 Copyright by rt-thread team
[SFUD] Warning: Read SFDP parameter header infor…
-
2x8gb DDR3L; only 1x8gb shows up on both an x230 and x230t. I believe what I'm seeing is similar to this issue: https://www.reddit.com/r/coreboot/comments/amonz5/135v_ram_compatibility_and_some_resear…
-
In GitLab by @StaDo0815 on May 2, 2020, 14:45
Hello,
I have a problem with recognizing the TL866II Plus.
I always just get the following message
 
![GitHu…
-
@MichaIng
I hope you can help me with another issue.
I had issues with slow and unstable wifi connection using plex so i changed everything out to UTP cat6a.
I ssh-ed into my dietpi via wifi and…
-
**Describe the bug**
@galak When this commit of yours was merged: 8357005ba12f2a10d080d7bd40405c4e796c77cf
I am observing a build error now:
"devicetree error: clock-names property in /soc/sercom…
-
Hi, My device is FT232H, I use it as an SPI master to communicate with other devices.
The clock output is incorrect when I set it to mode 3.
Here is the screenshot. The signal is MOSI, MISO, CS, SCK…
nxdhf updated
4 years ago