-
TL;DR : ratgdo hardware and web UI work with 100% success, but HomeKit integration fails with 0% success.
OK, I have tried many times to figure this out with no success yet. It’s been rather frust…
-
Hello, besides the fact that i have studied some documents i got still stuck on how two tswitch from
Init phase into data phase when using a sensor (Motor encoder or light / color sensor.
To kake a…
-
**Which version of Room Card?**
1.08.02
**Describe the bug**
When using Firefiox, Cards listed under cards: repeatedly reload/refresh causing a flickering effect.
experiencing issue with weather…
-
[2/23/2021, 8:26:43 PM] [homebridge-daily-sensors] This plugin generated a warning from the characteristic 'Current Ambient Light Level': characteristic was supplied illegal value: number 0 exceeded m…
-
**_Reported by Anas Nashif:_**
Add support for Panther board based on Quark SE C1000, this board comes with Wifi and BLE and a sensor shield.
- [x] GH-1559: Barebone Panther board support
- [ ] GH-1…
-
Hello,
I've been trying to figure out why my fire tablets are running slowly (i know - they are always slow) but i believe it is being caused by the auto-entities card. When I remove it from my da…
-
When using Alibi in a car and in some circumstances, especially with rain or very sunny days that causes reflection, the autofocus tries to focus on the windshield making the video blurry. It would be…
-
#### Expected Behavior:
The Optical Sensor's LED should light up when I set the LED's PWM to 100, and should turn off when I set the LED's PWM to 0, regardless of whether or not I have used the funct…
-
In Ra2 there's occupancy for areas that have their sensors, and then there's also a 'rollback' timer. It's possible to have a room set with a rollback timer, and a value that executes a vacancy scene…
-
[Currently, brightml assumes that the illuminance/ambient light sensor is iio:device0](https://github.com/kootenpv/brightml/blob/c70909b49707318699ccc4f365adc3c4eaa222eb/brightml/features.py#L24). IIO…
xorgy updated
6 years ago