-
## Here are the steps I follow to reproduce the issue:
1. Build and install master (2.10) on Debian 12
2. Run the Axis sim
3.
## This is what I expected to happen:
The Axis sim to start up…
-
Cppcheck made some noise in emc/iotask and I tend to agree that something could be improved here.
```
$ cppcheck iotask/*.cc
Checking iotask/ioControl.cc ...
Checking iotask/ioControl.cc: TOOL_NML…
smoe updated
10 months ago
-
RIP 2.9 Branche
Debian Bookworm
Oracle VM VirtualBox
Hello,
Maybe I'll make an interesting machine with "X Y1 Y2 Z1 Z2" kinematics.
That's why I'm preparing for this situation. I made the con…
zz912 updated
10 months ago
-
Hi there! Sorry if this is the wrong place to write this, but is indeed seems to me like a bug in the software.
I downloaded the latest available LinuxCNC version yesterday as the ISO file, and i…
-
RIP 2.9 Branche
Debian Bookworm
Oracle VM VirtualBox
Configuration: [Remap_preview-002.zip](https://github.com/LinuxCNC/linuxcnc/files/12681864/Remap_preview-002.zip)
I made configuration with e…
zz912 updated
11 months ago
-
This is amazing, the kind of software I have been looking for. But unfortunately it does not support some G Codes that would open the doors to a whole other load of users.
In LinuxCNC and Mach3, la…
-
greetings!
I am using LinuxCNC 2.7.15.
when the component is operating, the cutter jerks up / down when turning on / off the thc, because
if (! enable) {
z_pos_out = z_pos_in;
z…
-
Hello,
I use the keyboard a lot, so I often use the TAB key to jump to the next field.
But unfortunately the tab order is often mixed up, so that you don't jump in order, but across.
I start…
-
Using SET_PIN for laser raster engraving is very slow.
Same code runs much faster on marlin using m42 instead of SET_PIN.
Attached gcode to test.
Removing m400 will make execution asynchronous.
…
-
1.start lathe.ini
2.load this file
3.G54 G18 G21 F400
G40 T2M6G43
m3 s100
o100 sub
g1 x50 z-40f10000
x100 z-39.999
o100 end sub
G72 Q100 X50 Z0 I3 R0.1
g0 x0 z0
m30
This work…