-
# Handle
gpersoon
# Vulnerability details
## Impact
If the function deployAccessControl of MISOAccessFactory.sol is called before devaddr is set, then the funds are send to address 0, and thus los…
-
Hi,
thanks a lot for the work of adding an abstract layer to d3, although I'm still climbing the learning curve.
I'm trying to add a layer to the contributed chart d3.chart.candlestick in the miso …
smarc updated
8 years ago
-
Dear all, this is my Klipper, printer.cfg configuration for my Octopus v1.1 referring input shaping:
[adxl345]
cs_pin: PA15
spi_bus: spi3
[resonance_tester]
accel_chip: adxl345
probe_poi…
-
![SKRpinoutpic](https://user-images.githubusercontent.com/45836295/69481666-59ae8b00-0e13-11ea-8ae9-6bb4eb9d44c7.jpg)
-
Hallo zusammen
erstmal ein Daumen hoch für die tolle Arbeit.
Ich habe mir das Radio nachgebaut mit einem 2,8 Zoll TFT das läuft auch wunderbar. mit dem alter werden die Augen schlechter und ich hab…
-
Switch the commentar of the last lines of setup and loop functions are not working on the HELTEC WiFi LoRa 32 V2
Link to Pin-Out: https://resource.heltec.cn/download/WiFi_LoRa_32/WIFI_LoRa_32_V2.pdf
…
-
Greetings, does this library work with the Adafruit Huzzah ESP8266 and the 2.4" TFT LCD Featherwing?
Looking at the TFT Featherwing [pinouts page](https://learn.adafruit.com/adafruit-2-4-tft-touch-…
-
## Environment
- Development Kit: own board
- Module or chip used: ESP32-WROOM-32D (16MB)
- IDF version: ESP-IDF v4.1-dev-1086-g93a8603c5-dirty
- Compiler: xtensa-esp32-elf-gcc (crosstool-…
-
## Environment
- Development Kit: ESP32-PICO-D4 in a custom board
- Module or chip used: ESP32-PICO-D4
- IDF version (run ``git describe --tags`` to find it): v4.2-dev-318-g605da33c3
- Bui…
-
Example code provides no clues on how to receive anything from SPI device.
Each my try point me to the conclusion that driver doesnt work properly or there is no enough informations to use it.
I am …