-
Hi bxparks,
To start, thanks for your work, you are amazing. Your lib is a good answer to a lot of problems I was manually solving before.
If I were to design it by hand, I would however add a `se…
boscs updated
3 years ago
-
板子使用的esp32-korvo-v1.1
在编译wake_word_detection这个程序的时候出现了cc1.exe: some warnings being treated as errors的错误,在stackoverflow上找到了解决方法,在makefile中加入CFLAGS = "-Wno-error"
CXXFLAGS = "-Wno-error"来忽略警告引起的错误,但是仍…
-
Version: ESP-IDF v4.3.1-dirty
Using VSCode Espressif plugin
I have been using the same code for some time now and have updated from platformio 4.2 to esp-idf 4.3.1.
A lot of heap is being used wh…
-
hi @mrfaptastic @vortigont ,
wondering if this related to the library but i notice high speed flickering. i havent go thru which part causing this but just to come out with some question regarding …
-
## Environment
- Development Kit: ESP8266_RTOS_SDK v2.1.0
- IDF version (``git rev-parse --short HEAD`` to get the commit id.):
f079158
- Development Env: Make
- Operating System: …
-
### Description of defect
Deepsleep not working, appears to be working in sleep mode (750uA) only. Deepsleep should be around 3uA normally.
#### Target(s) affected by this defect ?
ST…
-
### Perform all steps below and tick them with [x]
- [x] Check the related part of the [Documentation](https://docs.lvgl.io/)
- [x] Update lvgl to the latest version
- [o] Reproduce the issue i…
-
## Environment
- Development Kit: ESP-WROOM-32 NodeMCU
- Module or chip used: ESP32-WROOM-32
- IDF version: v4.2
- Build System: idf.py
- Compiler version: xtensa-esp32-elf-gcc (crosstool-NG es…
-
Currently, PlatformIO only seems to support `cmsis-dap and raspberry-swd` debug options. `jlink` and `stlink` do not appear to be supported.
`SEGGER` have updated their J-Link probe firmware to sup…
-
Hi All,
I’m Currently working on an USBx audio application with an stm32H743i. I have some point for support & enhancement .
I found a mistake when registering audio class in MS website https://…