-
**DISCLAIMER:** This is not a legal advise that would create client to lawyer relationship and is provided as-is with claim of no liability to the author.
---
The Free Hardware Designs 3D printi…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
[BUG] With TMC_DEBUG enabled in Configuration_adv.h using the M122 S0 command doesn't p…
-
Hi,
I just notice under extrusion on Cura 3.0.3. It's visible after travel before layer change. I try to enable/disable retractation, the issue is the same. The problem was not present in Cura 2.7.…
-
#### If this is a feature request describe it here
FEATURE_REQUEST_DESCRIPTION_GOES_HERE
#### Version of Octolapse
Octolapse Version: Octolapse_0.3.4
#### Version of OctoPrint
…
-
### The problem
Problem : prints are ugly and more likely to fail if printed through usb (exact same gcode printed from sd card are perfect)
What i saw :
- from sd card (even while octoprint is …
-
I tried to print twice https://github.com/prusa3d/Original-Prusa-i3/blob/MK3S/Printed-Parts/STL/extruder-body.stl part and both times it broke on similar place (even once i printed it with other parts…
-
### Description of the bug
Neumím anglicky tak používám automatický překladač, proto omluvte chyby v překladu, snad je u vás i česky mluvící vývojář.
V prusasliceru 2.5.0 je chyba při generování g…
-
![image](https://user-images.githubusercontent.com/52137446/107624724-92769200-6c5b-11eb-843b-655b2f5b389b.png)
OctoPrint 1.5.3 Python 3.7.3 OctoPi 0.18.0
Terminal shows the following message:
…
-
Hello,
I configured 3 instances of octoprint (prusa i3 mk3s+) and 3 logitech cameras. 2 cameras works fine with instance number 1 and 3, but camera 2 can't connect to instance number 2. I tried resta…
-
### Description of the bug
When I want to open a G-code file generated with Prusaslicer 2.4.2, an error message appears (see screenshot).
![Screen copy](https://user-images.githubusercontent.com/7…