-
**Firmware**
6.2.0
```python
Adafruit CircuitPython 6.2.0-beta.2 on 2021-03-01; Raspberry Pi Pico with rp2040
```
**Code/REPL**
keyboard.row_pins = (board.MOSI, board.A0, board.A1, board…
-
the ESP32 runs on 3.3V logic levels, which is fine, since a lot of electronic circuits and devices are compatible with this.
However to make the system more user friendly, and more compatible with …
-
**Background:**
I'm updating OpenLog Artemis to use v2.1.0 of the core. All is going well(ish) but I'm not able to receive any serial data on UART1. OpenLog Artemis uses pin 12 for Tx and pin 13 fo…
-
Adding a board to CircuitPython is very easy! It's primarily mapping the names of pins on the silkscreen to the internal GPIO names. We have a thorough Learn guide on adding a board [here](https://lea…
-
Hi folks,
Given the issues with the BNO080 and Artemis-based boards, I've been focusing my efforts on using this sensor with the SAMD21 platform (i.e. SparkFun Qwiic Micro).
I've read into the i…
-
Hello,
Seth here. I was trying to configure things from this lib. to handle python3. I have failed so far. I am missing something. But in the meantime, you guys or just you finalized the issue and …
-
The board this is for, is it the same as this one? https://www.amazon.com/HiLetgo-Gyroscope-Acceleration-Accelerator-Magnetometer/dp/B01I1J0Z7Y/ref=sr_1_1_sspa?dchild=1&keywords=InvenSense+MPU-9250&qi…
-
The Arduino IDE suggested that I update the Artemis boards. I suppose this follows the release you had a couple of days ago.
I accepted, but now getting the following kind of errors:
```
Detect…
-
I try your library on Arduino Pro Micro, i get following error:
```
Arduino/libraries/TimerInterrupt/src/TimerInterrupt.cpp:590:3: error: 'else' without a previous 'if'
else if (_timer == 1)
…
-
I'm fairly new to TM RFID Modules and to controlling anything more than a servo using UART. Where should I start if I'm trying to use a TI MSP430FR2355 to program an M6E Micro? I'm experienced in prog…