sparkfun SparkFun_BNO080_Arduino_Library issues

sparkfun / SparkFun_BNO080_Arduino_Library

An Arduino Library for the BNO080 IMU combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running powerful algorithms.

Other

77 stars 62 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

How to tare correctly?

#108 thire66 opened 5 months ago
0
getGravity()-function returns X-Value in all three axes.

#107 thire66 opened 5 months ago
0
Fix for Arduino Uno R4 minima and wifi

#106 mjs513 opened 1 year ago
0
v1.1.12

#105 PaulZC closed 1 year ago
0
Added functionality to access the Gravity vector

#104 anant3110 closed 1 year ago
1
[Feature Request] Add functionality to access Gravity packets

#103 anant3110 closed 1 year ago
1
Add tare function and example

#102 s-reynier closed 1 year ago
1
Uncertain on sensor rates

#101 adamoskaranikas closed 2 years ago
2
SPI Communication not working outside of Arduino IDE

#100 adamoskaranikas closed 2 years ago
3
Implementation of TARE functionalities.

#99 sofian closed 1 year ago
2
Addition of the uncalibrated gyroscope report

#98 bastienboudet closed 1 year ago
2
Sensors raw data conversion

#97 zoharshemesh closed 2 years ago
1
[urgent] How is interrupt signal while multiple reports are enabled?

#96 cognitiveRobot closed 2 years ago
1
[urgent] Freezing while running interrupt example

#95 cognitiveRobot closed 2 years ago
3
v1.1.11

#94 PaulZC closed 3 years ago
0
Full rotation is 2 degrees short of 360

#93 nathanWagenbach closed 3 years ago
4
Implement hasReset() to track Reset Complete response.

#92 mattbradford83 closed 3 years ago
4
SPI examples have incorrect comments

#91 EmDash00 closed 3 years ago
1
Remove the reference to SoftWire in Example11

#90 PaulZC closed 3 years ago
0
SoftWire isn't compatible

#89 EmDash00 closed 3 years ago
2
Wrong example for ESP8266?

#88 Eirenliel opened 3 years ago
0
Feature Request: setFrs() function for setting specific config parameters

#87 marcel-bluestone opened 3 years ago
2
BNO085 Jump Detection - which report to choose?

#86 marcel-bluestone closed 3 years ago
1
disable previously enabled functions, e.g. stepCounter

#85 marcel-bluestone closed 3 years ago
3
what to do when already some data in buffer?

#84 jerabaul29 closed 3 years ago
1
Feature Request: Please could you implement the TARE function? Thank you!

#83 michroz2 closed 1 year ago
9
BNO080 not working on shared SPI bus (multiple SPI slaves)

#82 SolidGeek closed 3 years ago
3
Questions: Euler, Quats and refresh rate

#81 ndanilo8 closed 3 years ago
3
Problem getting SparkFun VR BNO080 working with the Portenta

#80 cvoalex opened 3 years ago
27
Barebones SPI wiring?

#79 kdharbert closed 3 years ago
1
BNO080 not recovering from power cycle (Qwiic Power Switch)

#78 adamgarbo closed 3 years ago
4
The RVC output works flawlessly

#77 jerabaul29 closed 3 years ago
0
any experience using UART output?

#76 jerabaul29 closed 3 years ago
2
output frequency is wrong

#75 jerabaul29 closed 3 years ago
3
intermittent, minor issue: non unit quaternions, very high accelerations

#74 jerabaul29 closed 3 years ago
3
v1.1.10

#73 PaulZC closed 3 years ago
0
discussing about the I2C hanging issues

#72 jerabaul29 opened 3 years ago
59
Feature request: idle power / low power mode

#71 jerabaul29 closed 3 years ago
15
How to correctly query several types of information at a given rate, and know 1) which / 2) when ALL information types have been updated?

#70 jerabaul29 closed 3 years ago
15
Intermittent I2C problem between Artemis RedBoard and BNO080

#69 jerabaul29 closed 3 years ago
4
problems connecting to the BNO080 from Artemis RedBoard

#68 jerabaul29 closed 3 years ago
10
low power

#67 jerabaul29 closed 3 years ago
4
float accuracy values for other quantities than quaternions

#66 jerabaul29 closed 3 years ago
4
Getting linear acceleration in the NED (North East Down) frame of reference

#65 jerabaul29 closed 3 years ago
7
Add tap detector

#64 aedancullen closed 3 years ago
1
Latency of gyro rotation vector report?

#63 mark-mcg closed 3 years ago
5
Merging release-candidate: v1.1.9

#62 PaulZC closed 3 years ago
0
No Data from i2c on Nano or Uno

#61 glyndavidson closed 3 years ago
5
Add getReadings keyword

#60 ya-mouse closed 3 years ago
0
Added an example for I2C with interrupts using getReadings and helpers

#59 guihomework closed 3 years ago
2