-
-
Hi, I would like to read stuff fast, but I think something is not right here. I am using the STM32F103 (bluepill)
Arduino framework, PlatformIO
platform = ststm32
board = bluepill_f103c8
framework…
-
In the pin diagram, number 27 of mosi, number 5 of sclk, and number 18 of cs are missing. We are suffering because we cannot resolve this. please help
![캡처](https://github.com/Xinyuan-LilyGO/LilyGo-L…
-
I was thinking about the RP2040 rules for the SPI clock, and looked at the logic in spi.fs. It looks strange and doesn't seem to work right.
The natural thing to do would be to divide the system c…
-
Hi,
When IOT works for a very long period (60 day) and I launch a reboot with cmd **sudo reboot**.
IOT can't reboot, with software, I force to do an hard reset electrical.
`===================…
-
I am using Ra-01s AI Thinker and using sx1268 but the following error occurred ERR_SPI_CMD_FAILED. MY pins configuration would be
`sx = SX1268(spi_bus=1, clk=18, mosi=23, miso=19, cs=5, irq=26, rs…
-
Hi, A feature that would be super-useful and provide a unique advantage for the FlexIO SPI over the standard SPI support, would be dual SPI. The dual SPI capability is ubiquitous among modern ADC's.…
-
i received my BTT PI and TFT35 SPI today and have managed to get the pi all setup, however no matter what i cannot get my tft35 spi display to show anything other than a white screen.
i can use a b…
-
I'm trying to read data from a sensor with a pretty fast sample rate, so I'm looking to get pretty close to the 500 kbps rate on the SPIDriver. I'm using one of the cheap Salae-8 knockoff logic analyz…
-
### Creating a bug report/issue
#### Required Information
- DietPi version | 8.6.1
- Distro version | bullseye
- Kernel version | `Linux DietPi 5.10.123-meson64 #22.05.3 SMP PREEMPT Wed Jun 22 0…