-
Hey,
I had installed the extension on my phone, and it works perfectly, but I can't get it to work on my desktop. It throws this error on line 274:
`ERROR: Execution of script 'IITC Plugin: Drone Tr…
-
... when other good options are available. We recently got some feedback about a particular route that isn’t performing the way we’d like. In this trip,
http://rtp.trimet.org/?submit&fromPlace=618%20…
-
### Description
Executing G26 with volumetric extrusion enables results in under extrusion.
### Steps to Reproduce
1. Enable volumetric extrusion
2. Run G26
**Expected behavior:** Validat…
-
After unparking in DXC_DUPLICATION_MODE I experience a slight movement of the duplication extruder towards the bed (approx. 5/10mm) followed by a screeching sound, 'extruder_duplication_enabled' kicki…
-
Hi @houbly
> **This is needed for Tuesday morning so we can user test on Tuesday afternoon.**
Icons are still to be decided by @KaterinaKir and @jkmnch (I can sort this on Tuesday morning).
…
-
### Bug Description
Nozzle to probe offset is ignored. Probably on X and Y axis.
### Configuration Files
Not relevant
### Steps to Reproduce
Compile latest 04c4c6004e752582235357b14aebd…
-
### Bug Description
I have a short start Gcode to move Y to -1 then lower the Z. I inserted M400 between Y and Z move to make sure the Z only lower after the Y reach -1. But sometime the Z still g…
-
## The problem
I use the Rejseplanen component: https://www.home-assistant.io/integrations/rejseplanen/
Rejseplanen is a travel planner tool for Denmark. So, if you want to go from A to B, you can…
-
### Description
When testing the latest compile of Marlin 2.0.x (5/23/2018 in this case) I'm getting motor stutters that I wasn't getting from my 2.0.x 3/19/2018 compile.
### Configuration
- …
-
I am not sure the best way to do this. If this is wrong, please point me in the right direction. I know it isn't a traditional github "issue".
I feel that having lots of good quality BreakOut Board…