-
### Prerequisites
* [x] Put an X between the brackets on this line if you have done all of the following:
* Reproduced the problem in Safe Mode:
* Followed all applicable steps in the…
-
### Prerequisites
* [X] Put an X between the brackets on this line if you have done all of the following:
* Reproduced the problem in Safe Mode:
* Followed all applicable steps in th…
-
### Prerequisites
* [X ] Put an X between the brackets on this line if you have done all of the following:
* Reproduced the problem in Safe Mode:
* Followed all applicable steps in t…
-
### Prerequisites
* [ X] Put an X between the brackets on this line if you have done all of the following:
* Reproduced the problem in Safe Mode: https://flight-manual.atom.io/hacking-atom…
-
```
Integrate a barometric altitude sensor to allow for much tighter altitude
control. This will be
especially useful for:
- automated landings
- hovering helicopters and quadcopters
- vertical …
-
QGroundControl does not start on a virgin Ubuntu 21.04 machine.
* Operating system: Ubuntu 21.04
* QGroundControl 4.x (any) latest downloaded today, SHA-1 of AppImage file is 2f13d215
* Autopuilo…
-
**Describe what happened:**
Enabling [automatic scrubbing](https://docs.datadoghq.com/tracing/guide/security/?tab=datadogyaml) does not scrub passwords with [Redis' AUTH command](https://redis.io/com…
-
```
Integrate a barometric altitude sensor to allow for much tighter altitude
control. This will be
especially useful for:
- automated landings
- hovering helicopters and quadcopters
- vertical …
-
I measured execution time of calls within Copter::fast_loop(), results (revomini, 1kHz, ekf3, armed, mean on 10s interval, in uS):
ins.update(); 9.83
attitude_control->rate_controller_run(); 13…
-
```
In Mission Planner - Flight Planner parameter prompt
Command off(0)/on(1) Delay(s)
DO_SET_RELAY 0 x
Should be:
Command off(0)/on(1) Second Parameter can be any numbe…