-
I have the latest (as of 8:15PM CST 7/30/18) 1.1.x bugfix running on a few machines. Both have bilinear leveling enabled. Some machines are running the 1284p chip and others are running the 2560.
I…
-
Normal forward extruder moves are being interrupted, or something :smiley:, particularly the first move or two after a retract -- including the corresponding unretract move. Seems to be a conflict be…
-
Running the 1.1.8 version of the Marlin firmware. For some reason my prints move after a few layers (see the image). This is really frustrating and a colossal waste of my material. This part was being…
-
### G33 Doesn't Probe
Initiation of G33 causes a probing failed error
### Steps to Reproduce
1. issue G33
2.
3.
**Expected behavior:** G33 begins autocalibration
**Actual be…
-
- [x] **PlatformIO Core**.
If you’ve found a bug, please provide an information below.
*You can erase any parts of this template not applicable to your Issue.*
-----------------------…
-
### Description
When enabled QUICK_HOME (move both X/Y axis at once) SENSORLESS_HOMING doesn't work (it doesn't trigger ENDSTOP) - when moving only one axis at a time, it does work. Also probab…
-
Firstly I thank the library, very rich.
**DESCRIPTION:**
I am designing a "cnc corexy", I use the following equipment:
1x Arduino UNO R3(generic).
1x CNC shield v3.
2x A4988 module
2x Stepper mo…
-
### PROBLEM DESCRIPTION
I already wrote about the problem with Shater, when he starts giving an endless command:
https://github.com/arendst/Tasmota/issues/9310#issuecomment-693249119
I have upd…
-
Help please!
```cpp
// A single Z stepper driver is usually used to drive 2 stepper motors.
// Uncomment this option to use a separate stepper driver for each Z axis motor.
// The next unused E dr…
-
My particular use case is to drive a [12V stepper motor](https://www.adafruit.com/product/324). I have the [AdvancedFirmata](https://github.com/soundanalogous/AdvancedFirmata) that I need. Even have t…