-
Using web interface (btw thank you very much to the authors for this feature) is not possible to chose 4/7 coding rate parameter which is used in Poland. Available values are only 4 and 5. Leaving …
-
Hi ! First to thank the development of this firmware!
I have a problem with GPS coordinates. I loaded in the menu like the web site is described. Using the formating of Google. But when i saw the r…
-
I tried compiling today following the [guide](https://github.com/f4exb/sdrangel/wiki/Compile-from-source-in-Linux) I get to around 82% and it fails saying the below:
```
[ 81%] Built target modatv…
-
Hi all,
After upgrading to WebUI 1.0.0 from pre-UI firmwares, the "Measure external voltage" switch is grayed out and so is box for External Voltage Pin number. After enabling and disabling "Send B…
-
I am trying to get my receiving data uploaded to radiosondy.info but I believe the port number has changed. On the website it shows s1.radiosondy.info:14580 or radiosondy.info:14580 instead of the aut…
-
### Platform
ESP32
### Description
Hello.
Thank you very much for your hard work. What I found out: The Short Name aka short_name is generated from letters and mac address numbers -- chan…
-
Hi
Could you add my custom telemetry?
Thanks
"SP9SKP": {
"comment": "SKP telemetry",
"struct": "
-
Starting with hamlib 4.5.4 (Debian 12), any apps that use hamlib for cat control switch the radio (ic705) from channel mode to VFO mode. For example, I put APRS in channel 99 on the ic705, when dire…
-
Currently the sine wave for the APRS transmissions are using a simply loop functionality with a busy wait. There are some concerns that there is error delay accumulating from this as per #12, and if t…
-
Currently we are using the standard message configuration for the AX.25 messages, however it may be beneficial to use the compressed message format to ensure the length of our transmission in terms of…