-
for general tests applicable to all robots see #33
for each robot the tests should detect compilation problems caused by using the robot-specific sensors and actuators. The test is part of the robo…
-
I am using Visual Studio Code 1.72.2 and PlatformIO 6.1.4. The board I am using is the Sparkfun ProMicro16 based on the 32u4. When compiling the example MIDIUSB_write.ino, I get the following warnings…
-
```
The TimerOne library can't be used together with either the Servo or the SPI
library.
In the case of Servo, TimerOne wins, whereas in the case of SPI, SPI wins and
TimerOne won't function.
Teste…
-
```
The TimerOne library can't be used together with either the Servo or the SPI
library.
In the case of Servo, TimerOne wins, whereas in the case of SPI, SPI wins and
TimerOne won't function.
Teste…
-
```
The TimerOne library can't be used together with either the Servo or the SPI
library.
In the case of Servo, TimerOne wins, whereas in the case of SPI, SPI wins and
TimerOne won't function.
Teste…
-
```
The TimerOne library can't be used together with either the Servo or the SPI
library.
In the case of Servo, TimerOne wins, whereas in the case of SPI, SPI wins and
TimerOne won't function.
Teste…
-
```
The TimerOne library can't be used together with either the Servo or the SPI
library.
In the case of Servo, TimerOne wins, whereas in the case of SPI, SPI wins and
TimerOne won't function.
Teste…
-
At first when using your library, I only got one static reading showing unrealistically high eCO2 values. Often at around 65000.
I then discovered the sensor works great with Arduino IDE and Sparkf…
-
Any chance the SAMD11 will be supported?
I bought the Every on a quick decision, since it stated compatibility as a HID device. But now I feel a bit cheated?
Thank you so much for considering
annoo updated
2 years ago
-
For full functionality, LEADS requires a number of analog sensors. The first official release of LEADS for VeC99 Racing requires:
1. A Voltage Sensor - _to indicate BATT voltage (and eventually inf…