-
When I loaded 2.0.2 I can write models and setting to the tx 1 time then it wont let me do it again. Its been the same for all the 2.0 updates. I can read them back from tx no problem then try to writ…
-
CAD/CAM: Fusion360
Sender: UGS v1.09 From Laptop
CNC: XCarve
Controller: latest XController using Grbl 1.1
Router and vacuum are on a 20 Amp circuit. Laptop, controller, and other non-motor items…
-
Like the title says, I was testing my new Discipad after soldering everything together. When I got to the 7 and 4 switches they would activate both when I would short only one. For example, I will sho…
-
So i have been trying to get my BLTouch probe working using the [bltouch] module but no luck.
What am I doing wrong? X and Y are homing fine but when i want to home the z axis it gives me this error:…
J2xWo updated
2 years ago
-
I have this cfg.sub under CPM 2.2 ROMWBW 3.01
```
C>submit cfg
C>WIZCFG M 00:AA:BB:CC:DE:02
C>WIZCFG G 192.168.178.1
C>WIZCFG I 192.168.178.25
C>WIZCFG S 255.255.255.0
C>WIZCFG N F0
…
-
Hi, great work you did (not only here)!
Is there a plan to not only make the ESP32 available as an USB device,
but also connect USB devices (I am mostly interested in keyboards) to the ESP32?
B…
-
Hi,
I have been using these libraries for so long now on dragino lora hat on Pi. Earlier we used to have dual communication between Adafruit atmega 32u4 and dragino lora hat.
Now we have our cus…
-
Can the programmer also used with DxCore (AVR-DA and AVR-DB) and MegaCoreX (AtMega4809...)?
-
Can you support the AVR128DA48 Curiosity Nano? The upload should work like the ATMEGA4809 Curiosity Nano, it is the same chip for UPDI Debug. Atmel nEDBG, see MegaCoreX.
-
MidiSynth example the problem of repeatedly "pressing" a key when it is released.
Notes are sounded twice with one press. My keyboard is not sensitive to key pressure. What's with that
make? Build …