-
Hello,
While building RS41ng I run in `region from" overflowed by 4 bytes` error message while linking.
Platform is Ubuntu 20.04.2 LTS.
Any hint how to solve?
```
➜ build git:(master) cmak…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Docker image
**ESP (ESP32/ESP8266, Board/Sonoff):**
NodeMCU ESP32
**Affected component:**
Sensor HDC1080
*…
-
There's a lock-up issue with the MAMBAH743+BMI270 hardware combination, which causes me unable to test the latest build of the master branch.
```
# diff all
# version
# Betaflight / STM32H743 …
-
Hello team,
the below alternative I2C address doesn't work, I guess because of a typo error ` \ `in line
#define **BMP280_ADDRESS_ALT `\` (0x76)** /**< Alternative I2C address for the sensor. */
…
-
**Describe the bug**
使用ldapp实现传感器数据的循环上报以及接收平台下发的消息。多次频繁下发消息时会出现以下问题日志:
[121360] try post recv packet fail
[121360] sal packet input fail
[121370] handle_socket_data socket 0 get data le…
-
I likely had a slightly different board to the one pictured but I found I could only get it to work with the following snippet, either I have a slightly different device with different chip ID or the …
-
**Describe the bug**
the app takes few minutes too open and show application environment; and splash screen is very annoying (stays on top while app is opening)
**To Reproduce**
Double clicking o…
-
Hi, I have problem with servo outputs for flying wing.
I have orderedd F3 Omnibus clone with current sensing: https://www.banggood.com/30-5-30-5mm-Betaflight-Omnibus-STM32F3-F3-Pro-Flight-Controll…
-
I have a MATEK F765 and a TARANIS Q X7
If i try to arm my motor it works well, but if I try launch mode a blue led start to flashing and I cannot arm anymore.
Below you can find my DIFF ALL and al…
-
https://shop.pimoroni.com/products/enviro-phat
device is a stack on hat for rpi0w, claims to use i2c, and sensors recognized by rpieasy, does any one have any advice how id go about implementing …