-
## 🤷🏽‍♂️ Current Behaviour
If using this software on Windows 10 having all 3 screens dimmed
my CPU usage goes up to 80% as well as the GPU.
## 🎯 Expected Behaviour
Proper ressource claim
##…
xcy7e updated
3 years ago
-
In section 6.2, "Using a Uniform PDF Instead of a Perfect Match", there's a need for clarification to avoid confusion.
The section currently states -
> This will still converge on the correct ans…
-
In code-blocks you can mark the lines that should get highlighted, however it looks somewhat off. It looks as if the highlighting is simply broken on the non-highlighted portions, they still have a lo…
-
Whenever I try to include any of my Qubino Flush dimmers in openzwave I get the following error during inclusion: `ERROR: Dropping command, expected response not received after 1 attempt(s). Command: …
-
# Overview
I need to connect my Philips Hue devices to Home Assistant, but I had previously connected to them on my iPhone using the Hue app.
Per [Home Assistant ADD PHILIPS HUE BULBS THAT HAVE PREV…
-
### Problem description
### The problem
The `K4003C` BTicino switch in ZHA doesn't support three key features:
- `led_in_dark`
- `led_if_on`
- `identify`
Those are fully supported by zigb…
m4r1k updated
2 months ago
-
My use case is for a light switch that normally functions as a momentary switch, but acts as a dim up/dim down switch when it is held for more than 250ms.
So to achieve this I have attached a funct…
-
Hallo,
Ist es geplant den Add-Z Stick und die ZigBee Kompatiblen Leuchtmittel vom Homepilot zu integrieren?
Ich würde mich auch irgendwie an der Arbeit beteiligen, habe leider nur Rudimentäre prog…
-
I like this theme a lot! Thank you.
But I have a slight problem with the white buttons like here. Notice the home button or arrow in the "script" - it's barely visible.
![Untitled](https://user-…
-
I post a feature request because of @Nerivec 's advice in a Z2M bug thread (https://github.com/Koenkk/zigbee2mqtt/issues/22249#issuecomment-2207153830):
These Busch-Jaeger panels (see https://www.zig…