-
### Describe the bug
updating CRAZYBEEF4FR to 4.3 RC1 I lost bind (SPI RX_support -> FRSKY_D) and I couldn't re-bind it, I sort the issue downgrading to version 4.2.11
### To Reproduce
update…
-
## Current Behavior
No
#define USE_DSHOT
#define USE_ESC_SENSOR
in target.h
## Desired Behavior
Have
#define USE_DSHOT
#define USE_ESC_SENSOR
in target.h
## Suggested Solution
Add
#d…
-
**Describe the bug**
Z-H-30 target does not work for Betafpv 1S 12A FC.
Tried 24khz and 48khz, motors dont spin.
Factory blheli_s 16.7 firmware works fine.
**Configuration:**
- Bluejay ver…
-
First thank you very much for providing all these information! It is very helpful for students and researchers.
I have few question
1. Can you tell us please what are the characteristics of the tr…
-
dshot600 seems to work ok, a little noisy through motors. (sounds faintly like an old dial up modem, though)
dshot1200 does not spin mtr 4 with master control, mtr2 and mtr3 individual tabs run fun…
-
### Describe the bug
When flashing BTFL 4.3 RC1 or RC2 onto the DarwinFPVF722HD, crossfire LQ and SNR on the OSD occasionally drops to zero and -30 for a split second and then immediately returns. Th…
-
### Describe the bug
The OSD is very slow to update, taking 25 sec to clear the startup screen with block-like display or clearing. OSD elements are displayed a few characters per second. For e…
-
### Describe the bug
Beeper soldered to BUZ+ and BUZ- pads doesn't beep on any trigger.
I have betaflight 4.2.11 set to beep on a switch. When i flip the switch, blue gyro led blinks as it shoul…
-
### Describe the bug
The OSD is very slow to update, taking 25 sec to clear the startup screen with block-like display or clearing. OSD elements are displayed a few characters per second. For …
-
### Describe the bug
when set to usb_hid_cdc = on, it is no longer possible to connect to the configurator
### To Reproduce
set to usb_hid_cdc = on
### Expected behavior
when set to usb_hid_c…