-
Hi,
Using your script to build a kernel for beagleboard xm, I end up with a bootable kernel but there is no mmc in /dev
in system.sh I modified those lines:
ARCH=arm
CC=arm-linux-gnueabi-
BUILD_UIM…
-
I believe some way to set baud rate for the serial traits is needed.
### Relevant problem
[Dynamixel](http://www.robotis.us/dynamixel/) servos comes with two different RS-485 protocols that have s…
-
To help us pinpoint your issue, please insert the output of the
following commands when ran on the system with the issue:
```shell
$ fwupdmgr --version
client version: 1.3.8
compile-time depend…
-
### Bug report
**What is the problem?**
Some devices in ramips-mt7621, (e.g. COVR-X1860, Multy WSM20, NWA50AX, NWA55AXE) are rarely affected by https://github.com/openwrt/openwrt/issues/11931
…
-
Device Status
Booting with ACPI:
- [x] All eight CPU cores
- [ ] Clock Scaling
- [x] Application Processor MMU
- [x] Adreno MMU
- [x] Left USB ports
- [x] Display
- [ ] Right Surface Conne…
-
I would love to see Ethernet support in WLED to minimize the latency when syncing LED strips to audio.
There are two ESP32 boards that have Ethernet:
* Olimex ESP32-POE _(I have a few of these)_…
-
Hi all,
I found this awesome project and I decided to give it a try; I bought the needed PCBs on PCBway and I'm waiting for them.
However, sice I don't want to depend on my PC (using Putty etc.) I w…
-
I implemented RISCV SoC on a Zcu102 fpga. I am trying to use openOCD and jtag-hs2 to download code to the board as instructed in the README. I have checked the physical connection and make sure it be …
-
### Problem description:
Use the SmartRow app at the same time as an third party app.
### Possible solution:
In order to still use the SmartRow app at the same time as a third party app, a seco…
-
When trying build for the pi, the build fails with this output:
`make ARCH=arm CROSS_COMPILE= -C /lib/modules/3.13.0-24-generic/build M=/home`
`/path/to/rtl8812au modules`
`make[1]: Entering direc…