-
I see the configuration setting for horizontal diffusivity
```
o.set_config('drift:horizontal_diffusivity', horizontal_diffusivity) # m2/s
```
and the note
> New config setting drift:horizonta…
-
There is a bug that happens almost always in any randomly generated map which is that the Lidar sensor detect that there is a wall but the robot can pass through the wall easily.
In other word the h…
-
I discovered an issue when using a castep.castep file for which lattice parameters have been held fixed. Normally of course when using CASTEP's internal geometry optimization this wouldn't be the case…
-
`keyword_PSurf` `keyword_input_nogit` `type_defect` | by bep599
___
The Tumbarumba met forcing file in CABLE-AUX was generated automatically by PALS. The surface pressure variable has the (x, …
-
Hi I have tryed to lunch the simulation with python launcher.py but I get serveral errors. Wich is the wrigth procedure to get it work?
I have followed the following one:
```
git clone https://…
-
reported by: @CloudyLex
```
Title:
Numerical non-LTE 3D radiative transfer using a multigrid method
Authors:
Bjørgen, Johan P.; Leenaarts, Jorrit
Publication:
eprint arXiv:1701.01607
Publication…
-
-
I will conduct 3 series of tests on spatial resolution:
1. Changing coarse grid resolution
2. Changing fine grid resolution
3. Changing the point where the fine grid meets the coarse grid
I am u…
-
In trying to understand a numerical instability in a high fidelity linear simulation, I have discovered a numerical instability that affects electrostatic stella. In the attached .zip file is a cyclon…
-
- license:
to be used for "Please cite this as..."
```
…