-
I've made some boards with the 16 MBit chips: W25Q128JV_SQ, W25Q128JV_PM as well as a new IS25LP128F, which is not included in flash_devices.h but is included in circuitpython devices.h. None of them …
-
**Describe the bug**
Following @Laczen 's request and our investigation in #24237, tests on the STM32 show that the NVS driver in the current master fails even if the DTS is correct. The NVS driver w…
-
I want to format the onboard flash on the Feather M0 Express and store some files there.
The format example gives the following output:
```
Adafruit SPI Flash FatFs Format Example
Flash chip JED…
-
你好：
根据NUC980 SD Writer User Manual CHT.pdf文档，SDWriter用于量产的工具，请问怎么编译生成SD_Writer.bin？ 用于NUC980_IOT板子量产
-
Request addition of Hex Five's JEDEC ID to https://github.com/riscv/riscv-openocd/blob/5d9f48640461fbac5c30958f63a01e666ee64dd4/src/helper/jep106.inc
-
Hi There,
I have a Buffalo Terrastation Pro TS-HTGL/R5 TS-H4.0TGL/R5 BUF-TS-HTGLR5(A). I can use your installer just fine to install Debian 10.7 on it.
In order to save noise and heat, I would l…
-
##### Any bug report raised here MUST be submitted according to this template or it will be flagged with 'Not enough information'. No action will be taken till all the prerequisite information is prov…
-
Figure 3.2 (mvendorid) says bits [31:7] are "Bank", but the description says that Bank should be the number of continuation codes.
According to [JEDEC standard JEP106](https://www.jedec.org/documen…
-
I'm migrating one of my crates to use the new v2 traits in [this PR](https://github.com/jamwaffles/sh1106/pull/5). Before, I had a few trait bounds on `OutputPin`. Is it enough to just change these to…
-
## Bug
### What I did
- download des angegebenen Images und flashen mit Etcher
- Datei "SSH" unter /boot angelegt (headless Installation)
- Pi mit der Speicherkarte gestartet
-> sudo raspi-co…