-
Setup description:
- Raspberry Pi 3 running knxd
- KNXD OPTIONS '-e 1.0.240 -b ipt:[local KNX gateway IP]
- Physical KNX gateway connected to KNX bus
- ETS 4 bus monitor on
- knxtool busmonitor1 ip:[R…
-
This is a workaround explanation for using **ESP-KNX-IP** Library to connect to **Home Assistant**.
The link between [Home Assistant](https://github.com/home-assistant/home-assistant) and a **KNX R…
-
Hi @envy ,
When using and configuring the ESP-KNX-IP Library but only by code and not using the ESP-KNX-IP webpage, are needed new functions:
* callback_delete_assignment
* callback_delete_regi…
-
I'm testing with sonoff-knx.bin version 5.13.1
Binary mapping for relays is working properly.
But I have found some strange behaviour for Sonoff TH16:
In Data to Send to Group Address it's not …
-
Moin moin,
ich möchte anfangen auch IP-Komponenten einzubinden und gerne auf YAHM umsteigen.
Ich würde gerne YAHM virtualisiert auf X86 laufen lassen und die Anbindung über das HM-MOD-RPI-PCB mach…
-
Make sure these boxes are checked [x] before submitting your issue - Thank you!
- [x] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
- [x] Searched the problem i…
-
Hey folks,
I'm trying to dimm the pwm signal on D5 GPIO14 Sensor (37 PWM1) through a potentiometer whos connected to ADC input of the ESP-12e
Here's a picture of the device configuration in the …
-
Hello,
after flashing to 6.1.1 I experience the following issue on a sonoff TH:
With the mqtt topic set to "sonoff-x" or "sonoff-18" get a correct SENSOR message:
**19:02:14 MQT: tele/sonoff-…
-
I'm trying to use bdsd-cli, I installed the bdsd.sock service correctly, I connect, but with getDatapoints I always get an empty array and then I can not send any commands
-
I am using an Enertex KNX router.
It does not matter from witch source the telegramms to the sonoff are comming, i used also an USB-KNX Interface.
After resetting the sonoff, its working (receivin…