-
It appears that M4 does not work with default pncconf created INI files
and possibly with other configuration utilities due to missing ini file settings
https://forum.linuxcnc.org/24-hal-component…
-
I just thought I bring this up to collect what comes to mind.
* Realtime Kernel - any issues?
* Frequency variations - just keep it at max?
* RPi-tailored software that we may otherwise miss?
* Wh…
smoe updated
10 months ago
-
# wrong unit handling of (standalone-)interpreter
## Here are the steps I follow to reproduce the issue:
1. rip installation of github master
2. with this tooltable:
* T2 P1 Z20 D2 ;2.0…
-
It is the G code generated by the post-processing, and I have been using it in the machining center of the FANUC CNC system, and there is no problem
-
Hallo,
zuerst einmal vielen Dank für diese tolle Routine.
Ich bin absolut begeistert von dieser Funktion.
Alles funktioniert perfekt, bis auf dieses eine Problem, welches ich einfach nicht gelöst…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Tried to build rotary axis config in the latest (as of 6/20/23) bugfix 2.1.*,
receive…
-
I'm having a problem with you project. I cant start Linuxcnc
I followed your instructions
- Added both files to the root of my config directory
- added `loadusr -W ./manualmatic gmoccapy.ini `to co…
-
Hey Scott,
Got around to poking at this again this weekend but a few problems.
1. using the current main I can't ping the pico, tried about everything. Have you tried this out with a rpi4 by c…
-
Should the following code
```
// Between version 2.8 and 2.9 the definition of LINELEN has moved. Below
// is a check whether 2.9 is installed. If so, the header is imported to
// get the correct …
-
RIP 2.9 Branche
Debian Bookworm
Oracle VM VirtualBox
Test sim AXIS
I have RIP installation of LinuxCNC. If I wants "Edit tool data..." It wants file from folder, witch is NOT in RIP folder.
…
zz912 updated
11 months ago