-
I'm very new to programming, and I don't think I will be able to do this, but I'm thinking that if you modify your emulator to not only be a HUE light but to appear as a HUE Motion Sensor... can Alexa…
-
I'd like to use this with a HC-SR501 Motion Sensor built-in (connected to the Pi 0).Would you consider adding support for that? Both in the software as well as an edited version of the hardware enclos…
-
I want to build a small driving/steering wheel controller compatible particularly with "Hard Drivin" and "Pole Position" variants on MAME, those need an endless 360° steering wheel (i.e. spinner) and …
-
Home Assistant:
Core version: core-2021.7.3
reolink_dev: version as of 21/07/2021 (commit: a3907d1d620f9ca8052682c22eb4d6faab05c561)
Camera Model: RLC-810A (6 cameras, no NVR)
Firmware Version…
dncex updated
2 years ago
-
Hi. I found in the readme:
Limited:
Not fully supported retransmit for QoS1 and QoS2
It's this still true?
Can you confirm that this problem also affects lua port of esp_mqtt (nodemcu)?
Because some…
-
I was wondering about far to high brightness values after starting the motion sensor sketch/device.
The root cause for it sits in motion.h
```
uint8_t status () {
brightsens.measure();
…
-
From @efernandez
I've been thinking of some changes for the ignition/reset logic. Below I try to explain my proposed changes in brief:
1. As a building piece, let's add the ability to remove al…
-
I have 4 Arlo Essential Spotlight Cameras (connected directly to wifi, no base station) that randomly go offline and do not work until I reinstall the camera just as if it were a newly purchased. The…
-
I'm not a great fan of these types of issues logged in Github, but for reference on my forum post:
Firstly I love you plugin. You did a great job designing it, and the interface is really the part …
-
I have updated this integration to 0.9.6.20 as I was experiencing regular disconnection problems (had to reload integration and/ or enter into installer mode in the alarm and exit again)
I noted th…