-
### The problem
this error started showing up a few versions ago and similar error appears in this case: #40166
Opening a new issue as the previous one wasn't properly resolved and the same error…
-
#### Environment
- OS:
- Erlang/OTP:
- EMQ: EMQ X Broker 3.2.2
#### Description
on EMQ-->Sessions page,when the CleanStart is false,the device with same clientID can not be reconnected afte…
-
Hello,
I'm not sure what's misconfigured, but I'm not getting any meter or autodiscover data sent to my MQTT broker. This is the contents of my mqtt section
```
mqtt:
host: 192.168.1.xx #x…
-
Dear colleagues,
I have ported wolfssl MQTT with wolfssl and lwip stack using FreeRtos with stm32H747 Nucleo board
![image](https://user-images.githubusercontent.com/30866381/120497170-78092580…
m2030 updated
2 years ago
-
**Describe the bug**
The snapshot of the two cameras I added work fine. However, when I tap into them to load the live video, it never loads.
I checked the stream in VLC and it loads almost instan…
-
## Issue 1
```
int MQTTSN::Client::subscribe(MQTTSN_topicid& topicFilter, enum QoS qos, messageHandler messageHandler)
{
int rc = FAILURE;
Timer timer = Timer(command_timeout_ms);
…
-
@TA2k kannst du dein addon nochmal checken, irgendwo wird darin sie seriennummer gerundet
worx.0 | 2021-07-05 10:04:35.707 | warn | State "worx.0.30174102170313010000.mower.totalTime" has …
-
#### Description
I am not able to connect from an Atmel SAM R21 to the mosquito.rsmb on my local machine. I followed the steps in [https://github.com/RIOT-OS/RIOT/tree/master/examples/emcute_…
ghost updated
3 years ago
-
**Environment**:
- EMQ X version (e.g. `emqx_ctl status`): I cannot get any version with this command. I think it is 4.0.2, could it be?
- Hardware configuration (e.g. `lscpu`): Raspberry Pi 3b
…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
### REQUESTED INFORMATION
_Make sure your have performed every step and checked the applicable boxes before…