-
Post-processing script C:\Users\jobem\AppData\Local\Programs\Python\Python310\python.exe PS C:\for arc overhangs in prusa> on file C:\Users\jobem\AppData\Local\Temp\.PrusaSlicer.upload.0817-3f43-751f-…
-
Currently prusaslicer has few hardcoded types of physical printer interfaces (octoprint, flashair etc).
Adding any new type means adding c++ code, rebuilding etc.
**This feature request is to a…
-
### What happened?
Hello,
have a problem, I can not print thin walls, the setting Wall thickness can not be put down.
I use an ender 5 and Voron V0 with 0.4mm nozzle each.
If I set to below …
-
### Description of the bug
While Arrange was never perfect, it used to be better at autoplacing than the current version. See the automatic arrangement:
![image](https://github.com/prusa3d/PrusaSlic…
-
When you have a project open, if you import a file from printables,com, then it will load the file into the existing project.
I would prefer that it opens a new instance of PrusaSlicer. The same way …
-
### Description of the bug
Often, when organic supports are generated, portions are created hanging in mid air.
### Project file & How to reproduce
![Untitled](https://github.com/prusa3d/PrusaSlice…
-
### Description of the bug
When I open a 3mf file and adjust certain things. I start printing. Normally I leave it open while printing small calibration tests.
But during the print my laptop goes in…
-
All the icons along the top bar (add, delete etc) are blurry and seem out of focus,
### Version
_Version of PrusaSlicer used goes here_
_Use `About->About PrusaSlicer` for release versions_
…
-
**Is your feature request related to a problem? Please describe.**
**In original Prusa Slicer i have often disabled the "fill gaps" option to improve print speed and print quality for some particular…
mrcg updated
4 months ago
-
I am using Slicer Thumbnails along with PrintJobHistory. It very convenient to visualize parts that are or were printer.
In Prucaslicer The G-code thumbnail is set to PNG, 16x16 and 200x200. Previou…