-
### PROBLEM DESCRIPTION
I use the Tasmota scripting option with subroutines and call the Subroutine from the Console. This subroutine calls another subroutine and the result MQT is gibberish. If …
-
Hello,
A question more on a higher level as I am still struggling to get the device tree right: what ultimately should be a driver in ```compatible``` field of device tree?
Right now, the DT looks…
-
- Hardware: Teensy LC with ENC28J60 LAN module
- Software: Configurable Firmata 2.8.0, UIPEthernet 1.09
- Active Features: digital outputs, I2C, serial port
Operation is as expected until a LAN disco…
-
### SOC
ESP32
### Lora IC
DL-CC68-S-868
### Product Link
https://www.samsclub.com/p/circuitmess-chatter-stem-project-build-and-code-walkie-talkies/PL980418145
### Description
Requesting reconsi…
-
Good day @rmackay9, @Georacer and @tridge!
Much respect for your work.
I have an `icm-20948` sensor and a `stm32f411ccu6` microcontroller
I know that the `Ardupilot` for the entire project requires…
-
When two M425 commands are placed in Cura > Machine > Start G-Code, prints have a consistent layer shift.
The layer shift occurs at different points depending on the version and configuration of Mar…
-
I don't know what to do exactly, for set the pinout for my laser 12V.
I see lot of part of solution, but I don't know what to do exactly, and why. Can you help me please ?
Is for what, this ?
`…
-
I have a "No Neutral" 2 gang touch light switch. The markings on the board say WIFI-W6B and i can see a ESP8285 on board.
I can't get this to flash using tuya convert. The switch seems to connect…
DJ-Q updated
3 months ago
-
I am having issues trying to get this to run on my Pi4. I can compile it without any problems, but running it has had me banging my head. Have you seen this before?
# run with debug
```bash
└─$ s…
-
Howdy good folks.
My issue is I want to use simple program for my MotorBridge Cape v1.0
```
import MotorBridge
import time
ServoName = 1
Frequency = 50
Angle1 = 45
Angle2 = …