-
### Creating a bug report/issue
#### Required Information
- DietPi version | 8.6.1
- Distro version | bullseye
- Kernel version | `Linux DietPi 5.10.123-meson64 #22.05.3 SMP PREEMPT Wed Jun 22 0…
-
### Summary
The [ezWS2812](https://github.com/SiliconLabs/arduino/tree/main/libraries/ezWS2812) library relies on SPI to drive the WS2812. Problem is, only on signal is (MOSI) but two others (MISO, …
-
Mentioned in https://www.rundfunkforum.de/viewtopic.php?p=1747213#p1747213
In case of a sync loss, SPI will no longer blink green. You need to change the DAB frequency and retune.
-
### Describe the bug
- After booting my device i get a kernel dump
- i get "enabling reset hack; may not recover from unexpected reboots" but 4-Byte opcodes are supported
see "Steps to reproduce"…
-
This is the code generated by BIPES for the SPI and I2C init blocks...
```
machine.SPI.SPI.init()
machine.I2C.I2C.init()
```
I'm not 100% sure what's the intent of the block here, but I'm gue…
-
Check [this link](https://edo.jrc.ec.europa.eu/documents/factsheets/factsheet_spi_ado.pdf).
From the above link:
- SPIs for short accumulation periods (e.g., SPI-1 to SPI-3) are indicators for immed…
-
Looks like on some systems (guess SKL+) has issue in spi_desc functionality in chipsec.
result from chipsec_util.py spidesc and chipsec_main.py -m common.spi_desc - not consistent. result is differe…
-
## Introduction
The SPI API isn't adjusted to be used for SPI slaves that don't know how much data will be sent by the SPI master.
### Problem description
Some SPI communication protocols don't…
-
Hi,
I need the most current (development-)u8g2 lib as it includes fixes for my display. I tried to run ```setup_src.sh``` but it fails with errors:
```
../bdfconv/bdfconv -y -1 -th 2 -tv 2 -f …
-
I was using Arduino Due with sdFat library. SPI_SPEED that I 'd set was 40mHz and, It worked well. Now then I'm using esp32 , but the maximum speed of SPI_SPEED seems to be 16mHz. I don't know why, I…