-
路由一直使用正常，经常几个月都没有重启也没有问题，最近装了XX后，路由就不定时重启了，但发现一个规律，如果终端一直连接墙外，连续几个小时也没有问题，但如果终端长时间没有连到墙外（比如一两个小时），突然一连接的时候，大约有75%的机会会路由器重启，请问是路由器的问题，还是XX的问题啊？
路由是128M RAM，16M FLASH
-
I have just upgraded 2x Raspberry Pis, one 3B+ with 2.90-14 Pi2, and one 3B with 2.90-14 Pi2 Large.
I have a Canable Pro which has been working for a few years with previous release and the manual in…
-
- ESP-IDF v5.0-547-g20e8e86c80
- SOC: Esp32 4MB flash
- Sming 5.0.0
I have an issue with initialization of Wifi, I used a clean machine and try to deploy the Basic_Wifi sample. The ESP freezes at…
-
```
What steps will reproduce the problem?
1. Connect to specific VPN server
2. Synchronize mails etc.
3. Wait 10 minutes
What is the expected output? What do you see instead?
Expected: VPN connectio…
-
Hello,
I recently wanted to use a joystick for my robot arm to control a XL320, it's working perfectly but when I modify the code to make it move in reverse nothing is happening. I really don't under…
-
## Environment
- Development Kit: all
- Module or chip used: ESP32-WROVER-I
- IDF version (run ``git describe --tags`` to find it):
// v4.4.1
- Build System: CMake
- Compiler ve…
-
## Environment
- Audio development kit: ESP32-LyraT
- Audio kit version: v4.3
- Module or chip used: ESP32-WROVER-E
- IDF version: both v4.4.4-278-g3c8bc2213c and v5.0.1
- ADF version: v2.6-23…
-
I have the same issue as @nschurando and @ggerganov. I'm using the Arduino Nano RP2040 Connect with the Arduino Mbed OS Nano Boards package in Arduino IDE 1.8.13. It won't compile with
`#elif define…
-
With the servlet feature removed and the TCK switched to run with the rest arquillian test protocol, I get the following failures:
For `FollowRedirectsTest` and `CDIFollowRedirectsTest`, the follow…
-
Adjust installation script for the PiCAN-M hat, so that the hat can be selected when using the VeCanSetup setup script, and both the can0 (for the Micro-C/nmea2000 connector) and can1 (for the RS422/n…