-
I stumbled over a coarse resolution of the `BMP180` sensor connected to an `STM32F103C8T6` at `I2cMaster1`. When reading exactly two bytes the first byte is not acknowledged by the master so that the …
-
I only just received my generic STM32F103C8T6 and the ST-Link V2 - programmer and was eager to try it out, but.. alas, the ST-Link binaries fail when the Arduino IDE tries to execute them. Executing t…
-
psr: 0x00000000
r00: 0x00000000
r01: 0x00000000
r02: 0x00000000
r03: 0x00000000
r04: 0x200018f8
r05: 0x200018f8
r06: 0x20010000
r07: 0x200018f8
r08: 0x20010000
r09: 0x00000001
r10: 0x00000000
r11: 0x0…
-
I get these errors when trying to compile a u8glib-based sketch, could you help me? Thanks
`In file included from [Arduino]/hardware/Arduino_STM32/STM32F1/cores/maple/boards.h:38:0,
…
-
I'm in the process to port the code to ARM micro controllers and GCC toolchain. My question is, if is there any project already doing this ? In this case I could contribute to it instead of starting f…
-
I installed the drivers as specified but in my device manager I get the following device:
Unknown USB Device (Device Descriptor Request Failed)
I have these boards : http://www.aliexpress.com/item/5…
-
-
There is a hardware [library](https://github.com/rogerclarkmelbourne/Arduino_STM32) to support STM32 based boards like the LeafLabs maple and other generic STM32F103 based boards. Is it possible to su…
-
https://github.com/rogerclarkmelbourne/Arduino_STM32/blob/master/STM32F1/variants/generic_stm32f103c/board/board.h#L43
I have this board from ebay
http://www.ebay.com/itm/360925962777
The led is on…
-
Hi,
board: CJMCU (Goodluckbuy)
receiver: Lemon Rc DSMX satellite on port2 (PA3)
Description: The mode settings are working while the board is powered, but not saved. Of course I pushed the save button…