-
It appears there is something wonky with the speed limits when printer closes in on horizontal delta rod angles. Around 25-30 degrees or lower causes odd issues where vertical movement on axis are ru…
-
When I use the throttle, I randomly encounter speed adjustment issues.
When I want to slow down, the display of the notches behaves erratically and increases the speed instead of reducing it. For ex…
-
I made custom board for Atmega2560 grbl controller for my hobby machine. I used pinouts shown in the bottom picture. It worked fine with grbl/Mega. I need 4th axe so I tried your 5X grbl. It works fin…
-
It would be nice if the sensors readings could have an orderly delivery algorithm to the cloud.
The current method, after writing the sensor readings to the SD card, is a single try to deliver th…
-
Type: Bug Report
**Describe the bug**
- OS and Version: Win11 Home 22H2
- VS Code Version: 11.77.3 as well as 11.78.0
- Serial Monitor Extension Version: 0.9.0 as well as v0.9.230504001
- Targe…
-
I'm just trying to build the following code for a Mega2560 board on a Win10 box with Arduino IDE Ver 1.8.13 working in the background:
```
void setup() {
Serial.begin(115200);
}
void loop(…
-
Please bare with me my terminology is probably all wrong (frameworks are above my pay grade!)
With Marlin when you build (for any system) one of the stages it goes through is
`.platformio/packa…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Hello,
I have configured Marlin 2.1.2.2.
With 2 Z stepper motors and 2 endstops.
The ste…
-
The SPI with the R4 is really slow, way slower than with the R3 when running the same clock and the same code.
[SPI_Arduino_Uno.zip](https://github.com/arduino/ArduinoCore-renesas/files/11940035/SP…
-
#### Description
SRF04 driver (drivers/srf04) does not seem to work properly. In tests/driver_srf04 the values seem incorrect and not correlated to the actual distance. It also feels like they over- …
wosym updated
1 month ago