-
# Candidate (KVM supported)
## Osv
https://github.com/cloudius-systems/osv
## MirageOS
https://github.com/mirage/mirage
## rusty-hermit (rust)
https://github.com/hermitcore/rusty-hermit
-
I have *exactly* the same issue as termux/termux-app#78:
```
Err:1 http://termux.net stable InRelease
Clearsigned file isn't valid, got 'NOSPLIT' (does the network require authentication?)
Fetched 965…
-
With the current master (r20964-b58f3c573d) NBG6817 (only luci added) enters into a bootloop. Wifi LEDS are flashing yellow and then reboot. I have no serial cable / connectors the hardware, so I cann…
-
There are reports that the Maia SDR firmware v0.1.0 doesn't work with a Pluto rev. C. After the firmware is flashed, the Linux kernel doesn't seem to boot completely.
On closer inspection of the di…
-
Hi,
I have a spare RPI 1B+ and I would like to add Wifi+BT/BLE in order to use it for an IOT project (using mosquitto and node-red). My project would require Wifi and BLE to work simultaneously, W…
-
### Describe the bug
After upgrading the raspberry pi kernel to 6.1 the sense hat matrix does no longer work. Thonny and python report that they can communicate with it and seem like they are tryin…
-
**Describe the bug**
Raspberrypi Camera Module 3 can't be recognized by my Raspberrypi 4B
```
pi@raspberrypi:~ $ libcamera-hello
Preview window unavailable
[0:00:20.076342801] [684] INFO Camer…
-
sdr0 not showing up for openwifi img on [ADRV9364-Z7020 + ADRV1CRR-BOB (LVDS mode)]. Tried to reflash image, tried retriggering udev, tried re-running ./openwifi/setup_once.sh. Cannot find the problem…
-
orange pi zero 2 - when will it be supported?
-
This is likely false memory, but I don't remember Quicklisp having this performance issue a few months ago, before I reinstalled all my dev tools.
I measured how long it takes with and without Quic…