-
Hey,
thank you very much for the amazing library. Everything is working fine, but when I try to read data using the Fast Read QUAD SPI 4IO I only receive the first few bytes. I am using a W25Q64JV.…
-
**Environment:**
You can get some of this info from the text that pops up in the console when you run a pygame program.
Windows 10
pygame-ce 2.3.0.dev1 (SDL 2.26.4, Python 3.11.0)
**Current …
-
Steps to reproduce
1. In Firefox, create a Sine Wave Generator
2. Create a table
3. Drag Sine Wave Generator into table
4. Switch to Local Clock mode in the Time Conductor
5. Scroll to the bottom…
-
We have to read data line as early as possible for IBM XT keyboard within 5us.
https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol#note-for-start0
https://github.com/tmk/tmk_keybo…
-
I have a testcase with 4 VVC. 3 of them executing some bfm-procedure (that could take 1 to many clock cycles) and one executing insert_delay(1 clock cycle).
I have noticed that when using:
await_c…
-
### Checklist
- [X] I made sure that there are **no existing issues** - [open](https://github.com/FossifyOrg/Clock/issues) or [closed](https://github.com/FossifyOrg/Clock/issues?q=is%3Aissue+is%3Aclo…
-
I have been struggling to figure out an elegant and simple way to make use of the display on this expansion board, but to no avail.
Feel free to use this as an example base yaml config in this repo…
-
___
***Bugsquad note:** This issue has been confirmed several times already. No need to confirm it further.*
___
### Godot version
4.0.stable
### System information
Ubuntu
### Iss…
-
Hi,
I am having a simple three node setup formed in a triangle:
Link_1: source-->hop-->sink.
Link_2: source-->sink
On the source is configured ETF qdisc as follows:
```
qdisc replace dev e…
-
Hi
When I2C 0.91 OLED display (128x32) is connected and properly set ( telnet: sys.lcd("6") ) after system reboots it works and correctly displays station info but when switching to clock mode or t…