-
I use CNCjs on the GRBL board, connected directly with the USB port. As soon as I connect the Controller board using the ethernet cable, USB connection starts to act weird (it receives some messages b…
-
### Version
2.0.11
### Hardware / Firmware
GRBL 1.1
### What happened
Trying to get UGS running on RPi3 using the instructions as provided.
Downloaded, extraction and changing permissions are al…
-
### Version
Other
### Hardware / Firmware
GRBL 0.9
### What happened
The entire download facility on JFrog is out .
I get a badly formatted page with several panels declaring themselves "heal…
-
I have my Grbl Controller in inches and I have customized the step sizes for XY and Z (low, medium, and High) However, I cannot seem to modify the jog feed rate. The max is set at 38100 inches per …
-
### Version
2.0.12
### Hardware / Firmware
GRBL 1.1
### What happened
![image](https://user-images.githubusercontent.com/4926369/196685854-13fd5d08-8953-4e51-974d-98ee5582e8e9.png)
### How to …
-
Hi.
I want to use the keyboard, but I have encountered some problems. I use MSP430G2554 to drive the keyboard. The IIC interface of MSP430G2554 (keyboard board) is connected to tiva-c (DRO board), …
-
### Version
2.0.11
### Hardware / Firmware
GRBL 1.1
### What happened
Main menu and Drop-down menus are not in English.
### How to reproduce
Downloaded from GitHub.
### Operating System
Wind…
-
Low priority issue . Noticed that grbl tab doesnt display when connected to controller after an F5 refresh. This happens via USB and WIFI. Only tested on X32
-
How can I solve this error or problem.
0x40080400: _init at ??:? //What is the cause of these ??:? in the monitor
idf.py --version
ESP-IDF v4.4.1
uname -a
Linux jan-LubuntuEST32 5.15.0-39…
-
This seems to be the usage habit of mach3?