-
@Samywamy10 Can you also try watching `bluetoothctl` from the CLI while you are connecting to the lock. Is the device being constantly being added and removed from the bus?
_Originall…
-
Silk Screen lists ETB2 under ETB1 pins and ETB1 under ETB2 pins.
Also in here should have CR2 and CR1 to VR2 an VR1 to match firmware naming
-
### Regression?
Yes
### System Info and Version
System/Version info
```sh
Hyprland, built from branch build-alpine at commit 918d8340afd652b011b937d29d5eea0be08467f5 dirty (with patches: use-…
-
On a new switch lite with picofly chip and new gulikit sticks, Hekate seems to detects movement making the cursor appear and wander typically to the bottom right of the screen.
It's the same issue de…
-
### Scooterhacking Tool
Firmware (SHFW)
### Type of issue
Performance issue
### Severity of issue
high (major functionality broken, no workaround)
### SHUT Version
2.3.2
### SHFW Version
0.3.…
-
When I upload TM1637 example sketches to the ESP32 Devkit V1, the program crashes with a watchdog reset. I already found the cause, and the fix. The problem is, the fix requires a big change to severa…
-
In https://github.com/robotology/icub-models-generator/pull/231 all the `analogServer` wrappers that were exposing FT sensors measures /icub//analog:o ports were removed, and this change was released …
-
Most Brother instructions have you starting from the left, but it also works starting from the right. Their instructions for restarting after a mistake allow restarting from either end. The CK35 manua…
-
Hello,
I have for as long as I have attempted to get the Speeduino working on my 1975 VW Bus had issues starting it. Now that the weather is colder it is basically a no go, so I decided to check th…