-
Add support for:
- [x] Virtual room operation panel: sends EEP A5-10-06, temperature channel should be linked with follow profile to another temp channel, setpoint channel is modifiable
- [x] Cont…
-
Bought from https://www.aliexpress.com/item/4001365588246.html
Type: Temperature and Humidity Sensor
Device schema below:
Standard Function / SetStandard State Set
temp_unit_convert Enum {"range…
-
I have a RaspberryPi Zero W with Raspbian Buster with desktop running on it.
Next to that I have a AM2302/DHT22 sensor with power on pin 2 (5 v), ground on pin 6 and data on pin 7 (GPIO 4).
I ins…
-
Function MakehttpRequest
```
if (httpCode == 200) // Checking the returning code
{
String payload = http.getString(); // Getting the request response payload
StaticJsonDocu…
-
I keep getting this error every 30 seconds or so.
I have 2 flair vents with 1 flair puck that controls an ecobee 3 lite thermostat with 3 ecobee room sensors. I'm guessing this error is coming from…
-
I have I2C connected humidity/temp/pressure sensor (BME860) to get data into SignalK and out again to the NMEA0183 network. I have the signalk-raspberry-pi-bme860 plugin and that brings data into Sig…
-
Please add support for ClimateGuard Radiation sensor
https://climateguard.info/radsens/
It's integrated in beta of Luftdaten since last March.
Here is the json for it:
`{"software_version"…
-
This issue was reported by @nikolozka in Issue #12.
The issue is still in the code and I would like to submit a PR for it, however, I'm trying to understand the reasoning behind this.
```python…
-
### The problem
New devices discovered that are not nee
### What version of Home Assistant Core has the issue?
Not sure. Been an issue for awhile
### What was the last working version of Home Ass…
-
### The problem
[Sensor groups](https://www.home-assistant.io/integrations/group/#sensor-groups) used to sum values are computing incorrect (lower) values. This is happening sometimes when HA restart…
seblu updated
4 hours ago