-
**Carefully written Issues are more likely to be given priority.**
**丁寧に記述された報告は優先して対応される可能性が高くなります。**
## Environment ( 実行環境 )
- MCU or Board name: [XIAO ESP32S3]
- Panel Driver IC: [ST778…
-
### Description
Product mcu : https://www.wch-ic.com/products/CH32V103.html
Features
Qingke V3A processor, max 80MHz system clock frequency.
Single-cycle multiplication and hardware division.
2…
-
### Summary
I'm encountering an error with battery threshold settings on my Lenovo Yoga Slim 7 Pro X (14IAH7). The system fails to read battery threshold values, resulting in the error below.
##…
-
Okay i added my I2C-Client code to my Split_Hoverboard_SimpleFOC and it runs :-)
But the motor now heavily stutters :-(
I guess the SimpleFOC::I2CCommander has not yet been tested with the GD32-Ar…
-
### The problem
Hello. I want to use the ags10 air quality sensor and aht10 temperature sensor with tca9548a i2c multiplexer on esphome. I couldn't find a source. my code is below. When I write the c…
-
Identify an appropriate I2C interface chip and add a JST connector compatible with [STEMMA](https://learn.adafruit.com/introducing-adafruit-stemma-qt/what-is-stemma) and [QWIIC](https://www.sparkfun.c…
-
## Overview
Using the I2C bus for data transmission is currently broken on the satellite. Any attempt at using the standard `smbus` library on the OBC results in `ioctl` errors as seen below and no d…
-
This line in the /boot/config.yxy on my rpi3, gives the rainbow screen and the RPI3 does not boot.
dtoverlay=i2c-gpio,bus=3,i2c_gpio_delay_us=1,i2c_gpio_sda=23,i2c_gpio_scl=24
-
Need a modification where a 2nd I2C bus can be used and not just the default Wire.
-
## Describe the bug
I'm currently using PX4 Firmware v1.13.1, tested with different flight controllers (CubePilot CubeOrange and Pixhawk 4). I have set the SENS_EN_LL40LS to I2C and SENS_EN_IRLOCK to…