-
I tried loading the gerber, BOM, and POS files for Classic Composite v2.1e into https://jlcpcb.com/ and the position of R5 and R6 are not in the correct location.
Other minor things:
- J3, J4, J5 …
-
Hey!
Interesting project! Do you also provide files for the jlpcb pcb assembly? I'm not particularly skilled at soldering small SMD components, so having jlpcb handle that would be greatly appreci…
ituri updated
7 months ago
-
Hey there, i was about to order a few PCBs, sadly the ESP-PSRAM64 (U2) and Power Inductors (L2) are out of stock. Could you please help me there to get the right component alternatives?
Thank you
-
Only the card change is detected but never any transfer or data led activity visible. Only my green power led is always lit.
Tried every driver/boot version I could think of on my Amiga 1200 but the …
-
**What do you want to achieve?**
I was trying to render with `pcbdraw` a panel generated by `panelize`, and depending on the size/complexity of the panel, raised the following error: `ERROR:PcbDraw e…
-
Hi Alex, first of all thank you for this great project.
I had a hard time doing hardware debug because of these vias near FPGA pins:
![image](https://github.com/ataradov/usb-sniffer/assets/37000…
-
While useful to retain the source files when compression of fab outputs is used, it is not needed in regular cases, also we can just unzip the compressed archives. As such, an option just as `keep_tem…
-
@Qwerty-OFF
Original design considerations for the current VR module were, in order of importance:
1) MAX9924 was not assembled by JLCPCB, and usually not stocked
2) Problems with compatibility…
-
I just measured board temperature using in-built methods.
| Old Prototype Board - Old Firmware | Old Prototype Board - New Firmware | New Board - New Firmware |
| ---------------------------------…
-
Full log is below:
```
/Users/kicad/remoteroot/workspace/build-macos-kicad-release/kicad-mac-builder/build/kicad/src/kicad/pcbnew/action_plugin.cpp(163): assert "PgmOrNull()" failed in register_ac…