-
Hey man I have followed your instructions to the letter except i am using an arduino uno instead of a micro. The code executes fine for the .png file and leaves me with a text file which I put on to a…
-
I managed to get the visualization.py to work, but the LED's don't seem to light up when I run the program. The power supply is on, the wires are connected, and IP's match. My only guess is that the h…
-
Many smart plugs have a LED you can turn on/off via MQTT topic /led/0/set. However I can't find a way to read the current status of the LED (if it is turned on/off). The logical path should be /led/0 …
-
I successfully flashed two feican RGBW light bulbs with Espurna. It would be great to add support for these lights as they are ESP8266 based cheap RGBW lightbulbs. I modified LC02 hardware pin definit…
-
LEDs are set in many different parts of the driver, and in each of them they do their logic on if they should or not set the LEDs based on the current LED authority.
This need to be reworked so sim…
-
The LED setting for the logo, doesn't affect the actual logo LED. Instead, it affects the profile LEDs and it even takes precedence over those LEDs' setting. If you set the logo LED to off, it doesn't…
-
### The problem
The rp2040_pio_led_strip can no longer control a sk6812 strip after 2024.6.0b1 it works fine with 2024.5.5. I scoped the pin output and I am getting data but my scope is really antiqu…
-
Make sure that the led status page reflects the latest behaviors of the firmware (https://microsoft.github.io/jacdac-docs/faq/led-status/)
-
### The Feature
Dear all,
First of all thx for this amazing project! Would it be possible to add functionality for a simple On/Off LED, on GPIO12? I would like to switch a simple white LED. Right …
-
Hello!
I would like to be able to change the colour of the power led on the Horus X10S Express. I guess on other radios it will also be possible. I don't like the standard blue that is used when the …