-
On a Raspberry Pi 4B, running a recent Debian Bookworm image from :
~~~
$ lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux bookworm/sid
Relea…
-
Debian Bookworm linuxcnc 2.9, installed via package manager.
When loading litexcnc the module is trying to load the extra modules from **/usr/rtlib** , which is fine I think for a RIP install.
F…
-
## Here are the steps I follow to reproduce the issue:
g1_error.ngc:
%
(logappend,feed.txt)
G94 G90
G1 F60 X0
(log,Should be 60: #)
M70
G93
…
-
Hello.
I have a relais board attached to my Colorlite 5A-75B.
When I turn on the maschine, the outputs from the colorlite are LOW. So, all the relais are turned on.
And therefore my coolant starts …
-
With the right kind of RX serial data, it's possible to crash LinuxCNC + mesa_modbus
with a stack error. While trying to duplicate a forum users error and experimenting
with mesa_modbus robustness t…
-
## Here are the steps I follow to reproduce the issue:
1. Install Fedora IOT and clone linuxcnc repo using git [this link](https://linuxcnc.org/docs/html/code/building-linuxcnc.html)
2. Install …
-
I have an external estop and a momentary switch to switch on my machine.
This is the relevant part of the hal file:
```
###############################################
# Estop circuit and machine en…
-
LinuxCNC installed on HP Prodesk 800 G2 from LinuxCNC 2.8.4 Debian 10 Buster PREEMPT-RT ISO, controlling a 3040Z-DQ mill via a parallel port card. Installed and configured in May, has been working fin…
-
I have 2 nozzles, setup as A and B in LinuxCNC and OpenPnP.
I added the B nozzle to POSITION_REPORT_REGEX, GET_POSITION_COMMAND, and MOVE_TO_COMMAND by just copying the regex of A as it is in the e…
-
During a rigid tapping operation motion.motion-type remains at 0.
This is because the tcInit call on line 1589 src/emc/tp/tp.o is passing 0 to canon_motion_type.
I propose changing the 0 to EMC_…