-
How would I go around using a file to emulate a USB-stick instead of a folder?
For example if I wanted to use my raspberry to store multiple OS boot disks, I could just change the file and use it t…
-
Hi!
I'm trying to install LinkWarden on my Raspberry Pi 4 with Raspberry OS
Sadly, I have this message: "no matching manifest for linux/arm/v8 in the manifest list entries"
I tried with the arm64…
-
I'm trying to build raylib-rs master (5.0.0) for armv7-unknown-linux-gnueabihf. The build fails due to type mismatch between u8 and i8. I guess this is the same issue as described here: https://github…
-
### Description
Hi!
The problem was reported some years ago. When you have a heating pump on 08 and a recoVAIR on same, it is not possible to scan recoVAIR.
Heat pump, recoVAIR and Vrc720 are …
-
Will MotionEye, in its current state, be compatible with the new RPi cam 3?
https://www.raspberrypi.com/news/new-autofocus-camera-modules/
> The new Camera Module 3 is only supported by the modern…
-
### motionEyeOS Version
motionEye Version | 0.42
Motion Version | 4.2.2+gitUNKNOWN
OS Version | motionEyeOS dev20200223
### Board Model
Raspberry Pi 4B 2 GB
### Camera
Raspberry Pi MM…
-
### Describe what you want to implement and what the issue & the steps to reproduce it are:
Hi,
I need to develop a program for object detection with YOLO using a Raspberry Pi. So for this case I …
-
Workshop to build a 64bit Docker OS for the Raspberry Pi 3
https://github.com/bee42/workshop-raspberrypi-64bit-os
-
Hey - I really like this project!
I have a working talkiepi on my raspberry pi zero w with the current raspberry pi os lite (Bullseye)
It works without any "Pi Zero Fixes".
Are they superfluous?
…
-
## Summary
I want to implement a machine learning algorithm using Concrete-Python on Raspberry Pi with following specifications:
Architecture: aarch64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Li…