-
Hello,
I have been using this library on the Lilygo T-Deck and it works great. I also created a tft_config.py which I have added below in case it could be added to the repo:
```py
""" LilyGo T-…
-
### Description:
Add support for SPISlave mode like the ESP8266 [SPISlave](https://github.com/esp8266/Arduino/tree/master/libraries/SPISlave) arduino library..
-
Thanks for the scripts, they work very well on an `Up Squared`! However I would need to control more than two spi devices with the Up board so I would like to use some GPIO as chip select. Any Idea on…
-
```
On the attached photo you can see the backsides of two 128x64 displays with
ssd1306 controller.
The display color of the right one is white and the color of the left one is
yellow/blue.
Both dis…
-
```
On the attached photo you can see the backsides of two 128x64 displays with
ssd1306 controller.
The display color of the right one is white and the color of the left one is
yellow/blue.
Both dis…
-
```
On the attached photo you can see the backsides of two 128x64 displays with
ssd1306 controller.
The display color of the right one is white and the color of the left one is
yellow/blue.
Both dis…
-
```
On the attached photo you can see the backsides of two 128x64 displays with
ssd1306 controller.
The display color of the right one is white and the color of the left one is
yellow/blue.
Both dis…
-
```
On the attached photo you can see the backsides of two 128x64 displays with
ssd1306 controller.
The display color of the right one is white and the color of the left one is
yellow/blue.
Both dis…
-
```
On the attached photo you can see the backsides of two 128x64 displays with
ssd1306 controller.
The display color of the right one is white and the color of the left one is
yellow/blue.
Both dis…
-
```
On the attached photo you can see the backsides of two 128x64 displays with
ssd1306 controller.
The display color of the right one is white and the color of the left one is
yellow/blue.
Both dis…