-
This is not an issue, sorry but I don´t know where to ask - I did not finma a GRBL forum.
As GRBL steps the motors back and forth, does it keep count of how many steps were given?
Something like …
amirm updated
4 years ago
-
The documentation notes "don't power the Pi from the Octopus as it's more tedious (due to power cycles)" and that there are two power cycles of the BTT board. It's not true that it's more tedious, an…
-
### Is your feature request related to a problem? Please describe.
The stock firmware for the Kobra 2 Neo is atrocious, and very difficult to use. Anycubic has not released any updates, and many feat…
-
There are some situations where it is necessary to disallow redefining the position of an axis with an absolute encoder.
This can be done at the driver level for model-3 motor drivers:
https://g…
-
When activating dual x carriage, sanitycheck wont let it compile:
# error DEPENDENCY ERROR: Missing or invalid definitions for DUAL_X_CARRIAGE mode.
Pins are sorted out, steppers are defined, but it …
-
Hi everybody, today I was able to implement the S42B on my Artillery Sidewinder X1 Y-axis.
I followed the steps that were shown on YT by Teaching Tech.
I put switch 4 on and did the calibartion. Af…
-
Hi Huub, really enjoying CNCL and now working on getting Spindle Sync working and have a couple of questions that the answers may help others:
Using an Arduino UnoMega 2560 with the lates edge releas…
-
**Describe the problem you have/What new integration you would like**
I would like some kind of support for some kind of I2C based motor driver like the WEMOS D1 MINI MOTOR DRIVE SHIELD.
**Ple…
-
In the Sinric Switch sample code ( switch_example.ino -> https://github.com/kakopappa/sinric/blob/master/arduino_examples/switch_example.ino )
I have to integrate a piece of code for a stepper motor…
-
### Description
I have a printer that uses 4 lead screws to move a reasonably large bed. The lead screws are to be used to level the bed mechanically rather than through the firmware based Z ax…