-
**Describe the set-up**
N/A - it's a poor release management issue on STMicroelectronics side.
**Describe the bug (skip if none)**
The release tag v2.3.0 points to v2.2.1.
**How to reprodu…
rexut updated
8 months ago
-
楼主您好,我是用keilv5编译工程发现报出大量头文件缺失的情况,部分已经根据您之前的issue,将v5路径加入解决,但还存在以下头文件无法找到
USB\usb_config.c(521): error: #5: cannot open source input file "usb_lib.c": No such file or directory
USB\usbd_STM32F103.c(…
-
Because HAL_I2C_Mem_Read_DMA MemAddress transmission is based on TX IRQ
https://github.com/STMicroelectronics/stm32l4xx_hal_driver/blob/a4d4011e08abea42cb6cbb7764e1a0c4e91c6fb5/Src/stm32l4xx_hal_i2…
-
### Describe the bug.
I get an error when compiling : Error 4294967295
### Reproduction
I re-downloaded the github: git clone --recursive --jobs 8 https://github.com/Flipper-XFW/Xtreme-Firmw…
-
dumb coils driven by https://github.com/rusefi/rusefi-hardware/tree/main/quad-igbt - that's the board wrapped in red tape with white subharness
if cranking with COPs connected firmware hands up. sa…
-
Based on what I understand from the datashhet, some of the functions have wrong description.
As an example:
https://github.com/STMicroelectronics/iis3dwb-pid/blob/a48eeaf81bad9bd689b78f1e063dbd95f52…
-
HI, bootloader has been erased. i cant flash with sd card, and cant connect over USB.
Can you share bootloader.bin with guide for flashing to recover my board?
-
The static function `ETH_InitCallbacksToDefault()` (see code snippet below) does **not** assign the callbacks listed below to their defaults:
* `RxAllocateCallback()`
* `RxLinkCallback()`
* `TxFree…
-
**What is the issue or idea you have?**
Touch event is performed at unexpected point on [LG V10](http://www.gsmarena.com/lg_v10-7606.php) device.
![](https://trello-attachments.s3.amazonaws.com/58…
-
let's move forward with mm for STM32F429IGT6 at least it has 256Kb
while we are testing all this hopefully we would grab some F7 maybe in October of 2023 https://www.mouser.com/ProductDetail/STMicr…