-
HI,
I am designing an IoT project to automate my need to open and close an electronic gate that is 2km away.
Here are some suggestions that I can use in the project:
- On the motherboard of the gar…
-
I'm trying to use the example sketch with au915 configuration, the lmic_project_config.h is configured as follows.
> // project-specific definitions
//#define CFG_eu868 1
//#define CFG_us915 1
#…
-
#### Description
I'm trying to port a code that runs perfectly fine on the `nucleo-l432kc` onto the `hifive1b`. The code compiles successfully and is being flashed onto the HiFive1 revB. However, i…
-
Even if you are set to EU433, I think this is legacy from the old method of selecting hardware and band in configuration.h
It may be a good idea to display which band and hardware is selected in boot…
-
First excuse me that I cannot write well in English, at the moment I am doing my thesis with lorashield Dragino implemented in Arduino Uno, I have a problem when I do the connection tests it works per…
-
Hi,
SAML21 port uses SAML21 Xplained Pro with SX1276 "Wing Board". Unforunately SX1276 "Wing Board" is not available in any shop. This setup is a bit out of date and Microchip replaced it with SAMR…
-
I seem to be unable to receive large payloads, similar to the reports in #622.
Running the ping-pong example on `develop` (87f19e84ae2fc4af72af9567fe722386de6ce9f4) with 2 B-L072Z-LRWAN1, I see LD1…
ghost updated
4 years ago
-
Hej, w tym wątku chciałbym opisywać po kolei możliwości jakie mamy na rynku. Dzięki temu będziemy mogli wspólnie wybrać najlepsze rozwiązanie dla naszego projektu. Skupie się tu głównie na omówieniu n…
-
Hello Matthijs,
I tried the `ttn-otaa` example but I've got this error :
```
Starting
SPI config
MOSI : 23
MISO : 19
SCK : 18
SS : 5
00:00:00.040: /home/github/basicmac/src/lmic/ra…
-
im using the sx1278 in the 400mhz range.
any chance of adding it?