-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
[BUG] Double z mode with asymmetric Z-axis step
MKS GEN_L V2.1 ，Z2_SERIAL_TX_PIN and Z2_S…
-
Good afternoon All!
Finally finished to assemble my custom made Hypercube Evo, now the software part!
Klipper/Moonraker/Mainsail installed with KIAUH script, I tried to do my own printer.cfg based o…
-
Hello,
I am unable to locate the TMC2209.h and TMC2209.cpp files in src folder.
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I have an Ender 3 Pro using an SKR 2 with 5x tmc2209, pi connected on serial 3 (wifi), …
-
I have made a port in C for this library to make it work on STM32 devices in case somebody need it is available if the owner of the original library allows it.
I haven't published it on GitHub but …
-
I followed the installation instructions. Even uninstalled and reinstalled.
Every time I get the following error when trying to use any command Unknown command:"STOP_LED_EFFECTS"
I even tried t…
-
Hello, first of all I use translation. Sorry if there is any confusion. I'm either missing something or doing something wrong as there isn't enough documentation in my native language, any help would …
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Hi, we are working with the BOARD_BRICOLEMON_LITE_V1_0, with have the SAMD51 IC from microchi…
-
Good, I have one problem ,that I can't solve even after several settings.
I set mechanically and klipper.
The problem is that for an unclear reason, the layer is moved.
The belt is stretched accura…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
At first, I set my priner as a Dual-Y-Axis printer, it works but the printed model is m…