-
Hi Rob,
I have a new SIM card and a new device.
The device could not dial in at first.
The support from 1nce recommended that I put the SIM card in a smartphone and test it. The connection was su…
-
### Creating a bug report/issue
#### Required Information
- DietPi version | 8.6.1
- Distro version | bullseye
- Kernel version | `Linux hostname 5.10.123-meson64 #22.05.3 SMP PREEMPT Wed Jun 22…
-
I’m seeing an occasional issue with the SARA-R422M8S when using secure MQTT.
When UART power savings mode is enabled, it appears that the MQTT keep-alive
ping functionality occasionally fails when t…
-
The library used in the present code, [SparkFun_Ublox_Arduino_Library](https://github.com/sparkfun/SparkFun_Ublox_Arduino_Library) is deprecated.
SparkFun issued a new library: [SparkFun_u-blox_GNS…
-
### Subject of the issue
When searching for the "SparkFun_u-blox_GNSS_Arduino_Library" in the new Arduino IDE 2.0, only the old "SparkFunk u-blox arduino library" version 1.8.11 is returned.
Can y…
-
Hello @DarrenWong, do you have the extrinsic measurements from the u-blox receivers to the MTi and to the Reference?
-
**Describe the bug**
Unable to receive RTCM corrections after following the rtk_examples.py on ZED_F9K receiver at baud rate of 38400. We replaced default fields with personal login for NTRIP clien…
-
CDC ACM is interface mostly used for modems.
ModemManager tries to detect modem on all newly added ttyACM devices.
This breaks TunerStudio communication few seconds after establish when ModemManages…
-
Hi, is there a command or function to output the number of satellite seen by the GNSS?
-
Hi,
I have several devices with the RIGADO BMDWare on them but whose hardware is inaccessible. I want to initialize these nRF52832 chips with out nRF Bootloader, Softdevice and Application.
I ha…